Soil & potting mix
Best soil for Table Fern (Pteris vittata)
Also called Table Fern, Ladder Brake Fern, Arsenic Fern.
More about table fern
About Table Fern
Pteris vittata · also called Table Fern, Ladder Brake Fern · houseplant
Pteris vittata is a fast, finely cut brake fern with ladder-like fronds of narrow pinnae on wiry stems. It is famous as a hyperaccumulator that pulls arsenic from soil. Indoors it makes an easy, airy tabletop fern, tolerating more light and slightly drier spells than most ferns while still wanting steady moisture and humidity.
Preferred mix: Loose, humus-rich, free-draining mix
Watch for — Crispy brown frond tips: Low humidity or letting the soil dry out fully. Raise humidity and keep moisture steadier.
Why table fern needs this mix
Table Fern hates drying out, so it wants a mix that stays evenly moist — but it still needs perlite so "moist" never tips into "waterlogged".
- Table Fern comes from damp, shaded forest floors and has fine roots that scorch and brown the moment the rootball dries — the mix has to hold a steady reserve.
- Coir and compost give that reserve, while perlite keeps enough air that the constantly-moist mix does not turn anaerobic.
- Even moisture also keeps its thin leaves from crisping at the edges, which is this plant’s most visible stress signal.
For the full picture on what makes up a good mix, see our guide to the main types of soil and potting media — it explains why each ingredient above behaves the way it does.
What goes wrong with the wrong mix
The wrong soil is one of the most common reasons table fern struggles, and the damage often shows up weeks later as a watering problem. For this species specifically:
- A free-draining, gritty mix dries too fast for table fern — you get crispy brown edges and frond or leaf drop within days of one missed watering.
- A pure, airless peat mix swings the other way: it holds water but suffocates the fine roots and rots the crown.
- Letting the mix dry to the point it shrinks from the pot is very hard to re-wet evenly and stresses the plant badly.
Using a sharp, fast-draining "houseplant" or cactus-leaning mix that lets table fern dry out. It needs a moisture-retentive but still airy blend.
pH — does it matter for table fern?
Table Fern prefers a slightly acidic mix (around pH 5.5-6.5); a peat-free compost-and-coir blend sits there naturally, so routine pH testing is unnecessary.
If you want to check or adjust it, the soil pH guide walks through testing and the safe ways to nudge a mix more acidic or more alkaline.
DIY mix vs a bagged one
A good peat-free houseplant compost works for table fern straight from the bag if you mix in some perlite for air. The DIY ratio above gives a more reliable moisture-to-air balance.
Drainage and the pot
Use a pot with a drainage hole but a less-porous material (plastic or glazed) so it does not dry too fast. Bottom-watering keeps the mix evenly moist without sogging the crown.
Peat-free mixes slump and compact as they hold moisture, so refresh table fern's mix every 12-18 months to keep air in the rootball even if the pot size is unchanged. When the time comes, our repotting guide for table fern covers the timing and technique step by step.
Table Fern soil — frequently asked questions
What is the best soil mix for table fern?
3 parts peat-free houseplant compost : 1 part coco coir : 1 part perlite. Table Fern comes from damp, shaded forest floors and has fine roots that scorch and brown the moment the rootball dries — the mix has to hold a steady reserve.
Can I use normal potting soil for table fern?
A free-draining, gritty mix dries too fast for table fern — you get crispy brown edges and frond or leaf drop within days of one missed watering. A good peat-free houseplant compost works for table fern straight from the bag if you mix in some perlite for air. The DIY ratio above gives a more reliable moisture-to-air balance.
Does table fern need a special pH?
Table Fern prefers a slightly acidic mix (around pH 5.5-6.5); a peat-free compost-and-coir blend sits there naturally, so routine pH testing is unnecessary.
Should I buy a bagged mix or make my own for table fern?
A good peat-free houseplant compost works for table fern straight from the bag if you mix in some perlite for air. The DIY ratio above gives a more reliable moisture-to-air balance.
How often should I refresh the soil for table fern?
Peat-free mixes slump and compact as they hold moisture, so refresh table fern's mix every 12-18 months to keep air in the rootball even if the pot size is unchanged. Use a pot with a drainage hole but a less-porous material (plastic or glazed) so it does not dry too fast. Bottom-watering keeps the mix evenly moist without sogging the crown.
Keep reading
- Table Fern care — the full brief (light, water, humidity, problems, pet safety)
- How often to water table fern — the schedule the mix feeds into
- Repotting table fern — when and how to refresh the mix
- Soil pH guide — test it and adjust it safely
- Underwatered plant — signs and how to rehydrate it
- Why is my plant wilting? Wet vs dry diagnosis
- Should I water my plant? The simple check first
- Best soil for snake plant
- Best soil for dracaena
- Best soil for peperomia
- All 2464 soil and potting-mix guides in the Growli library