Soil & potting mix
Best soil for String of hearts (Ceropegia woodii)
Also called rosary vine, sweetheart vine, chain of hearts.
About String of hearts
Ceropegia woodii · also called rosary vine, sweetheart vine · houseplant
String of hearts is a delicate trailing succulent from southern Africa with heart-shaped silver-marbled leaves on thread-thin stems. Easy from cuttings and tolerant of dry conditions. Pet-safe and a popular shelf and macrame trailer.
Ceropegia woodii (Apocynaceae), native to southern Africa from Zimbabwe and Eswatini into eastern South Africa, a trailing succulent vine of rocky, well-drained ground.
A freely draining gritty mix with coarse sand or perlite is essential to protect the underground and stem tubers from rot.
Preferred mix: Free-draining succulent mix
Sources: hort.extension.wisc.edu, pza.sanbi.org
Why string of hearts needs this mix
String of hearts stores water in its leaves and stems, so it wants a free-draining, gritty mix that dries out fully between waterings — not a moisture-holding one.
- String of hearts carries its own water supply in its thick tissue, so the soil's job is to drain fast and then get out of the way.
- Its roots are adapted to short wet spells followed by long dry ones — a mix that stays damp removes the dry phase they depend on.
- A gritty mix also keeps the plant compact and well-coloured rather than soft, leggy and prone to collapse.
For the full picture on what makes up a good mix, see our guide to the main types of soil and potting media — it explains why each ingredient above behaves the way it does.
What goes wrong with the wrong mix
The wrong soil is one of the most common reasons string of hearts struggles, and the damage often shows up weeks later as a watering problem. For this species specifically:
- Standard potting compost on its own stays wet far too long for string of hearts; the lower leaves and stem base go soft and translucent first.
- Big plastic pots full of dense mix hold a wet core long after the surface looks dry — that hidden wet zone is where rot starts.
- Anything sold as "moisture control" is the opposite of what this plant wants.
Treating string of hearts like a leafy houseplant and using plain compost. It needs at least half its volume as grit, perlite or pumice to survive long term.
pH — does it matter for string of hearts?
pH is not a concern for string of hearts — anything from mildly acidic to neutral (6.0-7.0) works. Get the drainage right and pH looks after itself.
If you want to check or adjust it, the soil pH guide walks through testing and the safe ways to nudge a mix more acidic or more alkaline.
DIY mix vs a bagged one
A good bagged "cactus and succulent" mix works for string of hearts if you add roughly 30-50% extra perlite or grit. Mixing your own from the ratio above gives you full control of how fast it dries.
Drainage and the pot
Use a pot with a drainage hole and empty the saucer within minutes of watering. Terracotta is more forgiving than glazed or plastic because it dries the rootball faster.
This mix decomposes slowly, so string of hearts only needs repotting every 2-3 years — mainly to refresh the grit and check the roots are firm and pale. When the time comes, our repotting guide for string of hearts covers the timing and technique step by step.
String of hearts soil — frequently asked questions
What is the best soil mix for string of hearts?
2 parts standard cactus or succulent compost : 1 part perlite or pumice : 1 part coarse grit or coarse sand. String of hearts carries its own water supply in its thick tissue, so the soil's job is to drain fast and then get out of the way.
Can I use normal potting soil for string of hearts?
Standard potting compost on its own stays wet far too long for string of hearts; the lower leaves and stem base go soft and translucent first. A good bagged "cactus and succulent" mix works for string of hearts if you add roughly 30-50% extra perlite or grit. Mixing your own from the ratio above gives you full control of how fast it dries.
Does string of hearts need a special pH?
pH is not a concern for string of hearts — anything from mildly acidic to neutral (6.0-7.0) works. Get the drainage right and pH looks after itself.
Should I buy a bagged mix or make my own for string of hearts?
A good bagged "cactus and succulent" mix works for string of hearts if you add roughly 30-50% extra perlite or grit. Mixing your own from the ratio above gives you full control of how fast it dries.
How often should I refresh the soil for string of hearts?
This mix decomposes slowly, so string of hearts only needs repotting every 2-3 years — mainly to refresh the grit and check the roots are firm and pale. Use a pot with a drainage hole and empty the saucer within minutes of watering. Terracotta is more forgiving than glazed or plastic because it dries the rootball faster.
Keep reading
- String of hearts care — the full brief (light, water, humidity, problems, pet safety)
- How often to water string of hearts — the schedule the mix feeds into
- Repotting string of hearts — when and how to refresh the mix
- Soil pH guide — test it and adjust it safely
- How often to water succulents — the soak-and-dry method
- Overwatered plant — signs and recovery
- Root rot — how the wrong soil starts it, and how to save the plant
- Best soil for snake plant
- Best soil for dracaena
- Best soil for peperomia
- All 200 soil and potting-mix guides in the Growli library