Soil & potting mix
Best soil for Soft Tree Fern (Dicksonia antarctica)
Also called Tasmanian tree fern, Man fern.
More about soft tree fern
About Soft Tree Fern
Dicksonia antarctica · also called Tasmanian tree fern, Man fern · tropical
Soft tree fern is a slow-growing tree fern from the cool, damp forests of Tasmania and south-eastern Australia. It forms a stout fibrous 'trunk' of old leaf bases topped by a crown of huge arching fronds. Surprisingly hardy for a tree fern, it tolerates light frost and is a prized architectural plant in mild gardens.
Preferred mix: Rich, moist, free-draining acidic humus
Watch for — Crown or trunk drying out: If the growing crown dries the whole plant can die, even when the soil looks damp. Water directly into the crown and keep the fibrous trunk moist at all times.
Why soft tree fern needs this mix
Soft Tree Fern hates drying out, so it wants a mix that stays evenly moist — but it still needs perlite so "moist" never tips into "waterlogged".
- Soft Tree Fern comes from damp, shaded forest floors and has fine roots that scorch and brown the moment the rootball dries — the mix has to hold a steady reserve.
- Coir and compost give that reserve, while perlite keeps enough air that the constantly-moist mix does not turn anaerobic.
- Even moisture also keeps its thin leaves from crisping at the edges, which is this plant’s most visible stress signal.
For the full picture on what makes up a good mix, see our guide to the main types of soil and potting media — it explains why each ingredient above behaves the way it does.
What goes wrong with the wrong mix
The wrong soil is one of the most common reasons soft tree fern struggles, and the damage often shows up weeks later as a watering problem. For this species specifically:
- A free-draining, gritty mix dries too fast for soft tree fern — you get crispy brown edges and frond or leaf drop within days of one missed watering.
- A pure, airless peat mix swings the other way: it holds water but suffocates the fine roots and rots the crown.
- Letting the mix dry to the point it shrinks from the pot is very hard to re-wet evenly and stresses the plant badly.
Using a sharp, fast-draining "houseplant" or cactus-leaning mix that lets soft tree fern dry out. It needs a moisture-retentive but still airy blend.
pH — does it matter for soft tree fern?
Soft Tree Fern prefers a slightly acidic mix (around pH 5.5-6.5); a peat-free compost-and-coir blend sits there naturally, so routine pH testing is unnecessary.
If you want to check or adjust it, the soil pH guide walks through testing and the safe ways to nudge a mix more acidic or more alkaline.
DIY mix vs a bagged one
A good peat-free houseplant compost works for soft tree fern straight from the bag if you mix in some perlite for air. The DIY ratio above gives a more reliable moisture-to-air balance.
Drainage and the pot
Use a pot with a drainage hole but a less-porous material (plastic or glazed) so it does not dry too fast. Bottom-watering keeps the mix evenly moist without sogging the crown.
Peat-free mixes slump and compact as they hold moisture, so refresh soft tree fern's mix every 12-18 months to keep air in the rootball even if the pot size is unchanged. When the time comes, our repotting guide for soft tree fern covers the timing and technique step by step.
Soft Tree Fern soil — frequently asked questions
What is the best soil mix for soft tree fern?
3 parts peat-free houseplant compost : 1 part coco coir : 1 part perlite. Soft Tree Fern comes from damp, shaded forest floors and has fine roots that scorch and brown the moment the rootball dries — the mix has to hold a steady reserve.
Can I use normal potting soil for soft tree fern?
A free-draining, gritty mix dries too fast for soft tree fern — you get crispy brown edges and frond or leaf drop within days of one missed watering. A good peat-free houseplant compost works for soft tree fern straight from the bag if you mix in some perlite for air. The DIY ratio above gives a more reliable moisture-to-air balance.
Does soft tree fern need a special pH?
Soft Tree Fern prefers a slightly acidic mix (around pH 5.5-6.5); a peat-free compost-and-coir blend sits there naturally, so routine pH testing is unnecessary.
Should I buy a bagged mix or make my own for soft tree fern?
A good peat-free houseplant compost works for soft tree fern straight from the bag if you mix in some perlite for air. The DIY ratio above gives a more reliable moisture-to-air balance.
How often should I refresh the soil for soft tree fern?
Peat-free mixes slump and compact as they hold moisture, so refresh soft tree fern's mix every 12-18 months to keep air in the rootball even if the pot size is unchanged. Use a pot with a drainage hole but a less-porous material (plastic or glazed) so it does not dry too fast. Bottom-watering keeps the mix evenly moist without sogging the crown.
Keep reading
- Soft Tree Fern care — the full brief (light, water, humidity, problems, pet safety)
- How often to water soft tree fern — the schedule the mix feeds into
- Repotting soft tree fern — when and how to refresh the mix
- Soil pH guide — test it and adjust it safely
- Underwatered plant — signs and how to rehydrate it
- Why is my plant wilting? Wet vs dry diagnosis
- Should I water my plant? The simple check first
- Best soil for monstera
- Best soil for pothos
- Best soil for fiddle leaf fig
- All 1284 soil and potting-mix guides in the Growli library