Growli

Soil & potting mix

Best soil for Painted Brake Fern (Pteris quadriaurita 'Tricolor')

Also called Tricolor Fern, Painted Brake Fern.

More about painted brake fern

About Painted Brake Fern

Pteris quadriaurita 'Tricolor' · also called Tricolor Fern, Painted Brake Fern · houseplant

Painted brake fern is a colourful tropical table fern whose young fronds emerge flushed with red and bronze along the midribs before maturing to green, set off by reddish stems. A clump-forming species, it likes warmth, bright shade and steady moisture, making a vivid, easy-care houseplant or terrarium specimen that reaches around 45-60 cm tall.

Preferred mix: Rich, moisture-retentive, well-draining mix

Watch for — Browning, crispy fronds: Caused by dry soil or low humidity. Keep the medium evenly moist and raise humidity, especially in heated rooms.

Why painted brake fern needs this mix

Painted Brake Fern hates drying out, so it wants a mix that stays evenly moist — but it still needs perlite so "moist" never tips into "waterlogged".

For the full picture on what makes up a good mix, see our guide to the main types of soil and potting media — it explains why each ingredient above behaves the way it does.

What goes wrong with the wrong mix

The wrong soil is one of the most common reasons painted brake fern struggles, and the damage often shows up weeks later as a watering problem. For this species specifically:

Using a sharp, fast-draining "houseplant" or cactus-leaning mix that lets painted brake fern dry out. It needs a moisture-retentive but still airy blend.

pH — does it matter for painted brake fern?

Painted Brake Fern prefers a slightly acidic mix (around pH 5.5-6.5); a peat-free compost-and-coir blend sits there naturally, so routine pH testing is unnecessary.

If you want to check or adjust it, the soil pH guide walks through testing and the safe ways to nudge a mix more acidic or more alkaline.

DIY mix vs a bagged one

A good peat-free houseplant compost works for painted brake fern straight from the bag if you mix in some perlite for air. The DIY ratio above gives a more reliable moisture-to-air balance.

Drainage and the pot

Use a pot with a drainage hole but a less-porous material (plastic or glazed) so it does not dry too fast. Bottom-watering keeps the mix evenly moist without sogging the crown.

Peat-free mixes slump and compact as they hold moisture, so refresh painted brake fern's mix every 12-18 months to keep air in the rootball even if the pot size is unchanged. When the time comes, our repotting guide for painted brake fern covers the timing and technique step by step.

Painted Brake Fern soil — frequently asked questions

What is the best soil mix for painted brake fern?

3 parts peat-free houseplant compost : 1 part coco coir : 1 part perlite. Painted Brake Fern comes from damp, shaded forest floors and has fine roots that scorch and brown the moment the rootball dries — the mix has to hold a steady reserve.

Can I use normal potting soil for painted brake fern?

A free-draining, gritty mix dries too fast for painted brake fern — you get crispy brown edges and frond or leaf drop within days of one missed watering. A good peat-free houseplant compost works for painted brake fern straight from the bag if you mix in some perlite for air. The DIY ratio above gives a more reliable moisture-to-air balance.

Does painted brake fern need a special pH?

Painted Brake Fern prefers a slightly acidic mix (around pH 5.5-6.5); a peat-free compost-and-coir blend sits there naturally, so routine pH testing is unnecessary.

Should I buy a bagged mix or make my own for painted brake fern?

A good peat-free houseplant compost works for painted brake fern straight from the bag if you mix in some perlite for air. The DIY ratio above gives a more reliable moisture-to-air balance.

How often should I refresh the soil for painted brake fern?

Peat-free mixes slump and compact as they hold moisture, so refresh painted brake fern's mix every 12-18 months to keep air in the rootball even if the pot size is unchanged. Use a pot with a drainage hole but a less-porous material (plastic or glazed) so it does not dry too fast. Bottom-watering keeps the mix evenly moist without sogging the crown.

Keep reading