Soil & potting mix
Best soil for Kalanchoe Beharensis (Kalanchoe beharensis)
Also called felt bush, elephant ear kalanchoe, velvet leaf kalanchoe.
More about kalanchoe beharensis
About Kalanchoe Beharensis
Kalanchoe beharensis · also called felt bush, elephant ear kalanchoe · houseplant
A bold Madagascan succulent that becomes a small tree, with large triangular leaves wrapped in dense bronze-to-silver felt and dramatically wavy, toothed margins. Slow but eventually statuesque, it drops lower leaves to reveal a knobbly trunk. It needs strong light and dry roots, and like all Kalanchoe is toxic to cats and dogs.
Preferred mix: Gritty cactus and succulent mix
Watch for — Root rot: Soft trunk base and yellowing leaves from overwatering or heavy soil. Use gritty mix and water only when fully dry.
Why kalanchoe beharensis needs this mix
Kalanchoe Beharensis stores water in its leaves and stems, so it wants a free-draining, gritty mix that dries out fully between waterings — not a moisture-holding one.
- Kalanchoe Beharensis carries its own water supply in its thick tissue, so the soil's job is to drain fast and then get out of the way.
- Its roots are adapted to short wet spells followed by long dry ones — a mix that stays damp removes the dry phase they depend on.
- A gritty mix also keeps the plant compact and well-coloured rather than soft, leggy and prone to collapse.
For the full picture on what makes up a good mix, see our guide to the main types of soil and potting media — it explains why each ingredient above behaves the way it does.
What goes wrong with the wrong mix
The wrong soil is one of the most common reasons kalanchoe beharensis struggles, and the damage often shows up weeks later as a watering problem. For this species specifically:
- Standard potting compost on its own stays wet far too long for kalanchoe beharensis; the lower leaves and stem base go soft and translucent first.
- Big plastic pots full of dense mix hold a wet core long after the surface looks dry — that hidden wet zone is where rot starts.
- Anything sold as "moisture control" is the opposite of what this plant wants.
Treating kalanchoe beharensis like a leafy houseplant and using plain compost. It needs at least half its volume as grit, perlite or pumice to survive long term.
pH — does it matter for kalanchoe beharensis?
pH is not a concern for kalanchoe beharensis — anything from mildly acidic to neutral (6.0-7.0) works. Get the drainage right and pH looks after itself.
If you want to check or adjust it, the soil pH guide walks through testing and the safe ways to nudge a mix more acidic or more alkaline.
DIY mix vs a bagged one
A good bagged "cactus and succulent" mix works for kalanchoe beharensis if you add roughly 30-50% extra perlite or grit. Mixing your own from the ratio above gives you full control of how fast it dries.
Drainage and the pot
Use a pot with a drainage hole and empty the saucer within minutes of watering. Terracotta is more forgiving than glazed or plastic because it dries the rootball faster.
This mix decomposes slowly, so kalanchoe beharensis only needs repotting every 2-3 years — mainly to refresh the grit and check the roots are firm and pale. When the time comes, our repotting guide for kalanchoe beharensis covers the timing and technique step by step.
Kalanchoe Beharensis soil — frequently asked questions
What is the best soil mix for kalanchoe beharensis?
2 parts standard cactus or succulent compost : 1 part perlite or pumice : 1 part coarse grit or coarse sand. Kalanchoe Beharensis carries its own water supply in its thick tissue, so the soil's job is to drain fast and then get out of the way.
Can I use normal potting soil for kalanchoe beharensis?
Standard potting compost on its own stays wet far too long for kalanchoe beharensis; the lower leaves and stem base go soft and translucent first. A good bagged "cactus and succulent" mix works for kalanchoe beharensis if you add roughly 30-50% extra perlite or grit. Mixing your own from the ratio above gives you full control of how fast it dries.
Does kalanchoe beharensis need a special pH?
pH is not a concern for kalanchoe beharensis — anything from mildly acidic to neutral (6.0-7.0) works. Get the drainage right and pH looks after itself.
Should I buy a bagged mix or make my own for kalanchoe beharensis?
A good bagged "cactus and succulent" mix works for kalanchoe beharensis if you add roughly 30-50% extra perlite or grit. Mixing your own from the ratio above gives you full control of how fast it dries.
How often should I refresh the soil for kalanchoe beharensis?
This mix decomposes slowly, so kalanchoe beharensis only needs repotting every 2-3 years — mainly to refresh the grit and check the roots are firm and pale. Use a pot with a drainage hole and empty the saucer within minutes of watering. Terracotta is more forgiving than glazed or plastic because it dries the rootball faster.
Keep reading
- Kalanchoe Beharensis care — the full brief (light, water, humidity, problems, pet safety)
- How often to water kalanchoe beharensis — the schedule the mix feeds into
- Repotting kalanchoe beharensis — when and how to refresh the mix
- Soil pH guide — test it and adjust it safely
- How often to water succulents — the soak-and-dry method
- Overwatered plant — signs and recovery
- Root rot — how the wrong soil starts it, and how to save the plant
- Best soil for snake plant
- Best soil for dracaena
- Best soil for peperomia
- All 5561 soil and potting-mix guides in the Growli library