Soil & potting mix
Best soil for Alocasia Brisbanensis (Alocasia brisbanensis)
Also called cunjevoi, Queensland alocasia.
More about alocasia brisbanensis
About Alocasia Brisbanensis
Alocasia brisbanensis · also called cunjevoi, Queensland alocasia · tropical
Alocasia brisbanensis, the cunjevoi, is a robust Australian native from eastern rainforests with large, glossy arrowhead leaves on tall fleshy stems. It is a vigorous, clumping tuberous aroid that wants bright filtered light, steady warmth, high humidity, and a rich, free-draining mix. Every part is toxic to pets and people.
Preferred mix: Rich, moisture-retentive yet free-draining mix
Watch for — Drooping or wilting: Often underwatering on a thirsty plant, or conversely root rot from soggy soil. Check the mix's moisture before correcting either way.
Why alocasia brisbanensis needs this mix
Alocasia Brisbanensis hates drying out, so it wants a mix that stays evenly moist — but it still needs perlite so "moist" never tips into "waterlogged".
- Alocasia Brisbanensis comes from damp, shaded forest floors and has fine roots that scorch and brown the moment the rootball dries — the mix has to hold a steady reserve.
- Coir and compost give that reserve, while perlite keeps enough air that the constantly-moist mix does not turn anaerobic.
- Even moisture also keeps its thin leaves from crisping at the edges, which is this plant’s most visible stress signal.
For the full picture on what makes up a good mix, see our guide to the main types of soil and potting media — it explains why each ingredient above behaves the way it does.
What goes wrong with the wrong mix
The wrong soil is one of the most common reasons alocasia brisbanensis struggles, and the damage often shows up weeks later as a watering problem. For this species specifically:
- A free-draining, gritty mix dries too fast for alocasia brisbanensis — you get crispy brown edges and frond or leaf drop within days of one missed watering.
- A pure, airless peat mix swings the other way: it holds water but suffocates the fine roots and rots the crown.
- Letting the mix dry to the point it shrinks from the pot is very hard to re-wet evenly and stresses the plant badly.
Using a sharp, fast-draining "houseplant" or cactus-leaning mix that lets alocasia brisbanensis dry out. It needs a moisture-retentive but still airy blend.
pH — does it matter for alocasia brisbanensis?
Alocasia Brisbanensis prefers a slightly acidic mix (around pH 5.5-6.5); a peat-free compost-and-coir blend sits there naturally, so routine pH testing is unnecessary.
If you want to check or adjust it, the soil pH guide walks through testing and the safe ways to nudge a mix more acidic or more alkaline.
DIY mix vs a bagged one
A good peat-free houseplant compost works for alocasia brisbanensis straight from the bag if you mix in some perlite for air. The DIY ratio above gives a more reliable moisture-to-air balance.
Drainage and the pot
Use a pot with a drainage hole but a less-porous material (plastic or glazed) so it does not dry too fast. Bottom-watering keeps the mix evenly moist without sogging the crown.
Peat-free mixes slump and compact as they hold moisture, so refresh alocasia brisbanensis's mix every 12-18 months to keep air in the rootball even if the pot size is unchanged. When the time comes, our repotting guide for alocasia brisbanensis covers the timing and technique step by step.
Alocasia Brisbanensis soil — frequently asked questions
What is the best soil mix for alocasia brisbanensis?
3 parts peat-free houseplant compost : 1 part coco coir : 1 part perlite. Alocasia Brisbanensis comes from damp, shaded forest floors and has fine roots that scorch and brown the moment the rootball dries — the mix has to hold a steady reserve.
Can I use normal potting soil for alocasia brisbanensis?
A free-draining, gritty mix dries too fast for alocasia brisbanensis — you get crispy brown edges and frond or leaf drop within days of one missed watering. A good peat-free houseplant compost works for alocasia brisbanensis straight from the bag if you mix in some perlite for air. The DIY ratio above gives a more reliable moisture-to-air balance.
Does alocasia brisbanensis need a special pH?
Alocasia Brisbanensis prefers a slightly acidic mix (around pH 5.5-6.5); a peat-free compost-and-coir blend sits there naturally, so routine pH testing is unnecessary.
Should I buy a bagged mix or make my own for alocasia brisbanensis?
A good peat-free houseplant compost works for alocasia brisbanensis straight from the bag if you mix in some perlite for air. The DIY ratio above gives a more reliable moisture-to-air balance.
How often should I refresh the soil for alocasia brisbanensis?
Peat-free mixes slump and compact as they hold moisture, so refresh alocasia brisbanensis's mix every 12-18 months to keep air in the rootball even if the pot size is unchanged. Use a pot with a drainage hole but a less-porous material (plastic or glazed) so it does not dry too fast. Bottom-watering keeps the mix evenly moist without sogging the crown.
Keep reading
- Alocasia Brisbanensis care — the full brief (light, water, humidity, problems, pet safety)
- How often to water alocasia brisbanensis — the schedule the mix feeds into
- Repotting alocasia brisbanensis — when and how to refresh the mix
- Soil pH guide — test it and adjust it safely
- Underwatered plant — signs and how to rehydrate it
- Why is my plant wilting? Wet vs dry diagnosis
- Should I water my plant? The simple check first
- Best soil for monstera
- Best soil for pothos
- Best soil for fiddle leaf fig
- All 2464 soil and potting-mix guides in the Growli library