Growli

Plant care

Anthurium Dorayaki (Dorayaki Anthurium) care

Anthurium 'Dorayaki'

Also called Dorayaki Anthurium, Round Leaf Anthurium.

RHS H1aUSDA 11-12Toxic to petsIndoor Leaves typically reach 15-30 cm across when mature

Watering rhythm

5-9days

When the top 3-4 cm of mix is just dry, roughly every 5-9 days

Light

Bright indirect light (just back from a sunny window)

Soil

Chunky, airy aroid mix

Humidity

65-85%

Temp

20-28°C

Pet safety

Toxic to pets

Mature size

Leaves typically reach 15-30 cm across when mature

Care at a glance

Light

In the wild anthurium dorayaki grows on the bright edge of a forest canopy, not in the canopy and not in the open. Indoors, that translates to within a metre of an unobstructed window, sheer curtain optional. Give bright, filtered light to keep the rounded leaves full and well-coloured. An east-facing window or a position back from brighter glass suits it. Avoid direct sun, which scorches the velvety surface; too little light produces smaller, dull leaves and leggy growth. The fastest test: a hand held at the leaf casts a soft-edged shadow at noon — sharp shadow means too much sun, no shadow means too little light.

Watering

Aim for when the top 3-4 cm of mix is just dry, roughly every 5-9 days for anthurium dorayaki, but treat that as a starting point rather than a rule. A south-facing summer windowsill will dry the pot twice as fast as a north-facing winter room. Lift the pot; if it feels noticeably lighter than it did wet, water it. Water thoroughly, then allow the surface to dry before watering again; the chunky mix should stay lightly moist, never wet. Use room-temperature low-mineral water to protect the velvet leaves from tip burn. Cut back in winter as the plant slows down.

Soil and pot

Anthurium Dorayaki grows best in chunky, airy aroid mix. Use an open blend of orchid bark, perlite, coco chips and a little sphagnum or worm castings for a fast-draining, oxygen-rich root zone. Velvet-leaved anthuriums rot in dense, water-retentive soil. Keep pH slightly acidic and refresh the mix when it begins to break down. A pot with a working drainage hole is non-negotiable for this species — even free-draining mix will turn soggy in a closed planter. If you love the look of a decorative pot without a hole, use it as a cachepot around an inner nursery pot you can lift out to water.

Humidity and temperature

Anthurium Dorayaki sits happiest at around 65-85% humidity and 20-28°C (68-82°F). Loves high humidity; aim for 65% or more for the most pristine, plump foliage, with grow cabinets or terrariums ideal. It can manage at the lower end of this range with extra care. Combine humidity with airflow to discourage fungal spotting on the soft leaves. If you keep the room above 20 year-round and avoid placing the plant near a cold draught, a hot radiator, or an air-conditioning vent, you have already handled the two biggest indoor stressors.

Fertilising

Feed anthurium dorayaki sparingly. Feed every 2-4 weeks in spring and summer with a balanced, dilute liquid fertiliser at quarter to half strength, or use a gentle slow-release pellet. Velvet anthuriums are sensitive to salts, so keep feeds light and flush the mix periodically; pause feeding in winter. Skip fertiliser entirely on a stressed, recently-repotted, or actively wilting plant — fertiliser salts make damage worse, not better. Wait for a round of healthy new growth before resuming a feeding rhythm.

Common problems

Below are the issues we see most often on anthurium dorayaki in the Growli community. Each is annotated with the most common cause so you know where to start.

  • Crispy edges on the round leavesLow humidity or mineral-heavy water. Raise humidity above 60% and switch to rain or filtered water.
  • Root rot and yellowingFrom a mix that holds too much water. Use a chunky aroid blend and let the surface dry between waterings.
  • Loss of velvet sheenOften too little light or dust on the leaves. Provide brighter indirect light and gently clean foliage.
  • Spider mites and thripsDry air and soft leaves attract them; inspect undersides regularly and treat early with soap or appropriate miticide.

Propagation

Propagate by dividing basal offsets or rooted stem sections once the plant has multiple growth points, keeping roots intact on each piece. Stem cuttings with at least one node and aerial roots can be rooted in sphagnum or a chunky mix. Keep divisions warm and very humid until established. Propagation is the cheapest, most satisfying way to expand a collection — and it doubles as insurance against losing a mature plant to an accident. Take a backup cutting once the parent is established and healthy.

Toxicity to pets

Anthurium Dorayaki is toxic to pets. As an Anthurium hybrid it falls under the genus the ASPCA lists as toxic to cats and dogs (and horses). The toxic principle is insoluble calcium oxalate crystals; chewing causes oral burning, irritation of the mouth and tongue, drooling, vomiting and trouble swallowing. Keep away from pets and children. If you keep cats, dogs, or curious children in the house, weigh placement carefully — a high shelf or a hanging planter is enough for casual safety. For severe ingestion incidents, call your local vet and the ASPCA Animal Poison Control Center (in the US, 888-426-4435).

Pet-safety status is sourced from the ASPCA Toxic and Non-Toxic Plant List, which catalogues the most-asked-about plants for cats, dogs, and horses.

Anthurium Dorayaki care — frequently asked questions

What is the common name for Anthurium 'Dorayaki'?

Anthurium 'Dorayaki' is most commonly called Anthurium Dorayaki, but it is also known as Dorayaki Anthurium, Round Leaf Anthurium. The names refer to the same species, so care instructions for Anthurium Dorayaki apply identically to anything sold as Dorayaki Anthurium.

How much light does anthurium dorayaki need?

Anthurium Dorayaki grows best in bright indirect light (just back from a sunny window). Give bright, filtered light to keep the rounded leaves full and well-coloured. An east-facing window or a position back from brighter glass suits it. Avoid direct sun, which scorches the velvety surface; too little light produces smaller, dull leaves and leggy growth.

How often should I water anthurium dorayaki?

Water anthurium dorayaki when the top 3-4 cm of mix is just dry, roughly every 5-9 days. Water thoroughly, then allow the surface to dry before watering again; the chunky mix should stay lightly moist, never wet. Use room-temperature low-mineral water to protect the velvet leaves from tip burn. Cut back in winter as the plant slows down. The finger-test (or lifting the pot to feel its weight) beats a fixed weekly calendar because pot size, light, and season all change how fast the soil dries.

Is anthurium dorayaki toxic to cats and dogs?

Anthurium Dorayaki is toxic to pets. As an Anthurium hybrid it falls under the genus the ASPCA lists as toxic to cats and dogs (and horses). The toxic principle is insoluble calcium oxalate crystals; chewing causes oral burning, irritation of the mouth and tongue, drooling, vomiting and trouble swallowing. Keep away from pets and children.

What USDA hardiness zone does anthurium dorayaki grow in?

Anthurium Dorayaki is rated for USDA zone 11-12 (indoor in most US homes) and RHS hardiness H1a. Outside that range, grow it as a container plant that overwinters indoors before the first hard frost.

Anthurium Dorayaki deep-dive guides

Every aspect of anthurium dorayaki care, each with its own calibrated guide:

Featured in these plant shortlists

Anthurium Dorayaki qualifies for 3 curated Growli shortlists — each one filtered objectively from our structured plant-care library, so the selection is consistent and checkable:

Related guides

Anthurium Dorayaki is also commonly called Dorayaki Anthurium or Round Leaf Anthurium.