Light requirements
How much light does Chempedak (Artocarpus integer) need?
Also called Chempedak, Champedak.
More about chempedak
About Chempedak
Artocarpus integer · also called Chempedak, Champedak · tropical
Chempedak is a Southeast Asian relative of jackfruit grown for its sweet, aromatic, custard-like fruit. A medium to large evergreen tree, it demands constant heat, high humidity, full sun and deep, fertile, well-drained soil. It is intolerant of frost and dryness. Like its kin, cut surfaces ooze a sticky white latex.
Comfort temperature: 22-32°C
The exact light chempedak needs
Chempedak is a sun worshipper — it wants the brightest, most direct light you can physically give it indoors, and starves in the "bright indirect" most houseplants enjoy.
Put a number on it — this is what a meter (or a free phone light-meter app) should read where chempedak sits:
- Footcandles: Roughly 1,000–2,000+ fc at the leaf (a high-light plant).
- Lux: Around 10,000–20,000+ lux — full, direct sun, not filtered.
- Duration: Aim for 5–6+ hours of direct sun a day.
In plain terms, An unobstructed south-facing window (or west), pressed right up against the glass — 0 to 2 ft back. Several hours of genuinely direct sun on the leaves is the target, not just a bright room. North windows and anywhere more than a few feet from the glass. A spot that grows pothos perfectly will slowly etiolate chempedak.
Not sure how to read the light in your home? Our light meter guide walks through measuring footcandles and lux with a free phone app and turning the reading into a placement decision for chempedak.
Signs chempedak is getting too much light
The most exposed leaves show it first. For chempedak specifically, watch for:
- Bleached, washed-out leaf colour and dry, papery brown scorch patches where the midday sun hits hardest.
- Crispy edges on the most exposed leaves while shaded ones stay fine.
- Scorch right after a sudden move into raw sun without hardening off over a week or two.
Light damage does not heal — a scorched leaf stays scorched — so the fix is to move chempedak out of the harsh light rather than wait for it to recover.
Signs chempedak is not getting enough light
Too little light is slower and sneakier than too much. The classic tell is etiolation: the plant stretches and pales as it reaches for a window. For chempedak, look for:
- Etiolation — chempedak stretches, the gaps between leaves lengthen, and growth gets pale, thin and floppy reaching for a window.
- Weak, leaning, leggy stems and a generally faded, drawn-out look.
- Few or no flowers, and far slower growth than a well-lit specimen of the same plant.
If chempedak is stretched, leggy and pale, our guide to leggy, stretched plants covers how to fix it and whether it can be pruned back into shape. Treating chempedak like an average houseplant and parking it "in a bright room" away from the glass. For a sun lover, indirect light is a slow decline — it stretches, weakens and stops flowering long before it ever dies.
Where to put chempedak: the best window and room
Indoors, the only reliable spot for chempedak is hard against a south or west window. Outdoors in summer it is happiest in full sun once hardened off over a week. A sunny conservatory, glazed balcony or the brightest windowsill in the home is ideal; a north room will never be enough no matter how "bright" it feels to your eye, because eyes adjust to dimness far better than plants do.
- Find your brightest window. For chempedak that means a south or west window with no tree, awning or building blocking it. East is a distant third; north will not do.
- Put it right at the glass. Place chempedak within 0–2 ft of the pane so the sun actually lands on the leaves. Every foot back roughly halves the light it receives.
- Harden up after any move. Moving from a dim spot to full sun? Increase exposure over 7–14 days so the leaves acclimatise, or even a sun lover will scorch.
- Rotate and recheck seasonally. Quarter-turn the pot weekly for even growth, and reassess in autumn — the same window gives far less light in winter.
Does chempedak need a grow light?
Chempedak is one of the few houseplants where a strong grow light genuinely earns its place: in a dark flat, a high-output full-spectrum LED run 10–12 hours a day, kept close, can replace the south window it cannot get. Weak desk lamps will not cut it for a sun lover — match the intensity, not just the colour.
The seasonal light shift (why winter changes everything)
From October to February the sun is low, weak and short. Chempedak that thrives on a summer windowsill can stall or etiolate over winter even in the same spot. Move it to the very brightest window for the dark months, clean the glass, and accept slower growth — or supplement with a grow light. It will not need feeding while light is this low.
Light and watering are linked: a plant in weaker winter light photosynthesises and drinks far less, so the same routine that worked in summer can rot it. See how often to water chempedak for the season-by-season schedule that pairs with this light plan.
Chempedak light requirements — frequently asked questions
How much light does chempedak need?
Chempedak needs Roughly 1,000–2,000+ fc at the leaf (a high-light plant). Around 10,000–20,000+ lux — full, direct sun, not filtered. An unobstructed south-facing window (or west), pressed right up against the glass — 0 to 2 ft back. Several hours of genuinely direct sun on the leaves is the target, not just a bright room.
Can chempedak survive in low light?
No, not really. Chempedak is a sun lover — in low light it etiolates: it stretches, pales, weakens and slows right down. It will not instantly die, but it steadily declines and never looks its best.
What are the signs chempedak is getting too much light?
Bleached, washed-out leaf colour and dry, papery brown scorch patches where the midday sun hits hardest. Crispy edges on the most exposed leaves while shaded ones stay fine. Scorch right after a sudden move into raw sun without hardening off over a week or two. Treating chempedak like an average houseplant and parking it "in a bright room" away from the glass. For a sun lover, indirect light is a slow decline — it stretches, weakens and stops flowering long before it ever dies.
What are the signs chempedak is not getting enough light?
Etiolation — chempedak stretches, the gaps between leaves lengthen, and growth gets pale, thin and floppy reaching for a window. Weak, leaning, leggy stems and a generally faded, drawn-out look. Few or no flowers, and far slower growth than a well-lit specimen of the same plant. If you see this, move chempedak closer to the light or add a grow light — and check our guide on leggy, stretched plants.
Does chempedak need a grow light?
Chempedak is one of the few houseplants where a strong grow light genuinely earns its place: in a dark flat, a high-output full-spectrum LED run 10–12 hours a day, kept close, can replace the south window it cannot get. Weak desk lamps will not cut it for a sun lover — match the intensity, not just the colour.
Keep reading
- Chempedak care — the full brief (light, water, soil, problems, pet safety)
- How often to water chempedak — the watering schedule
- Light meter guide — measure footcandles and lux with a free phone app
- Leggy, stretched plants — why it happens and how to fix it
- Best low-light plants — what actually survives a dim room
- Plants for north-facing windows — what thrives with no direct sun
- How much light does monstera need?
- How much light does pothos need?
- How much light does fiddle leaf fig need?
- Light requirements for all 5561 species in the Growli library