Why does my chinese evergreen have brown tips?

The 5 most likely causes

The cause of Chinese evergreen brown leaf tips usually narrows to one of the items below, ranked by how often we see each in Growli's diagnostic chats. Work down the list — most readers find their answer in the top two.

1. Inconsistent watering rhythm (Most likely)
   Leaf tips are the last stop on the plant's water pipeline, so they are the first casualty when supply keeps stuttering. Swinging between bone-dry and soaked stresses Chinese evergreen even when the average amount of water is right. Settle into a steady rhythm — when the top 3cm of soil is dry, every 7-10 days — and check with a finger, not a calendar.
2. Low humidity (Likely)
   Chinese evergreen is native to humid environments and struggles when household humidity drops below 40%. The first sign is crispy brown leaf tips, followed by pale, curling foliage. A humidifier, a pebble tray, or grouping plants together raises local humidity meaningfully.
3. Fluoride or chlorine in tap water (Likely)
   Chinese evergreen is sensitive to the fluoride and chlorine added to most municipal water supplies. Minerals build up at the leaf tips and cause crispy brown edges or speckled spots. Switch to rainwater, filtered water, or tap water that has sat uncovered for 24 hours so the chlorine can off-gas.
4. Fertiliser salt buildup in the soil (Likely)
   Months of feeding leave mineral salts behind in the potting mix. The salts pull water away from the finest root tips, and the damage shows up at the far end of the water pipeline — the leaf tips — as crisp brown edges that keep creeping. Flush the pot with plain water until it runs freely from the drainage hole, two or three times in a row, every couple of months during the feeding season.
5. Root-bound in its pot (Likely)
   When roots circle the pot, water runs straight through and the plant can no longer take up nutrients. Chinese evergreen typically needs a fresh pot every 1-2 years — one size up, not several. If you can see roots through the drainage holes or the soil dries in a day or two, repot.

Why Chinese evergreen in particular

Aglaonema is notably sensitive to the fluoride and dissolved salts in tap water, and crisp brown tips on otherwise green leaves are its signature complaint. Those minerals travel to the leaf edges and accumulate there, scorching the far tips first. Watering with hard or softened tap water, or letting fertiliser salts build up in the pot, brings it on. Dry indoor air below the humidity this rainforest-floor plant prefers accelerates the same tip browning.

Normal turnover, or real trouble?

A pinprick of dry brown at one leaf's tip is close to universal on Aglaonema and purely cosmetic - it does not spread, and the leaf works on fine. Judge it by progression, not presence. Trouble is when the brown creeps back along the blade, appears on many leaves, or arrives with a widening yellow zone behind it. A tip the same size for weeks is a scar, not a problem.

How to diagnose in 60 seconds

Run these quick checks before you change anything — the right fix depends on what you find.

• Is the browning confined to the very tips and edges, or spreading inward in patches? Tips-and-edges = moisture/air/minerals; spreading patches = disease or rot.
• What water do you use? Straight tap water in a hard-water or fluoridated area is the most common brown-tip culprit for sensitive species.
• Check humidity with a cheap digital hygrometer near the plant. Below 40% is brown-tip territory for tropical foliage.
• Look for a white crust on the soil surface or the pot rim — that is fertiliser salt buildup, and the tips are where it bites.

The fix — step by step

Change the water, not the scissors. Because this aroid resents fluoride and salts, switch to rainwater or distilled water - or tap left uncovered overnight - and every couple of months flush the pot: pour low-mineral water slowly through until it runs from the base, several potfuls, to leach built-up salts away. Cut fertiliser back. Trimming the tips to a neat point looks tidy but changes nothing without fixing the water.

This is the recovery sequence Growli walks users through for Chinese evergreen with brown leaf tips. Work through the steps in order; skipping ahead is the most common reason a plant fails to bounce back.

1. Flush the salts out of the pot. Take Chinese evergreen to the sink and run room-temperature water through the pot until it flows freely from the drainage hole — then do it twice more. This washes out accumulated fertiliser and tap-water minerals, the most common tip-burn driver.
2. Fix the water itself. Switch to filtered water, rainwater, or tap water left uncovered for 24 hours so chlorine can off-gas. For fluoride-sensitive species this single change stops new tips browning within a leaf generation.
3. Raise the humidity around the plant. Aim for 45-55% relative humidity: a small humidifier, a pebble tray under the pot, or grouping plants together all work. Misting alone doesn't — it raises humidity for minutes, not hours.
4. Reset a steady watering rhythm. Tip burn loves a feast-famine cycle. For Chinese evergreen aim for when the top 3cm of soil is dry, every 7-10 days, checked with a finger 3-4cm down — never a fixed calendar day.
5. Trim the brown tips cleanly (optional). Brown tissue never re-greens. For looks, trim the dead tip with clean scissors following the leaf's natural shape, leaving a hair-thin line of brown — cutting into live green tissue just restarts the browning.

When this can't be saved

Most cases of Chinese evergreen brown leaf tips are recoverable, but a few red flags point to a plant that has gone past the point of return. If you spot any of these, consider propagating a clean cutting and starting over.

• The browning is marching inward past a third of the leaf on most leaves within days — that is active tissue death, not cosmetic tip burn.
• Brown tips are paired with a soft, darkening stem base — the real problem is rot below the soil, not the air above it.
• A thick salt crust keeps returning days after a full flush — the mix is saturated with minerals and needs replacing, not rinsing.

Prevention

For Chinese evergreen, the single biggest preventative is matching its native rhythm: when the top 3cm of soil is dry, every 7-10 days, low to medium indirect light, and a free-draining pot with a working drainage hole. Water with filtered, rain, or overnight-rested water if your tap is hard or fluoridated, keep a hygrometer near the plant and hold humidity above 45%, and flush the pot through with plain water every couple of months during the feeding season so salts never accumulate to burning levels.

Common questions

Related guides

• What's wrong with my plant? — the diagnosis apps compared
• Is Chinese evergreen toxic to cats and dogs? — toxic to pets, per the ASPCA
• How often to water Chinese evergreen — the watering brief
• When to repot Chinese evergreen — pot size and timing
• Brown leaf tips on plants — the full diagnostic guide across species
• What's wrong with my plant? — Growli's flagship diagnosis index
• Chinese evergreen — yellow leaves
• Chinese evergreen — curling leaves
• Chinese evergreen — drooping
• Monstera — brown leaf tips